18″ 1/2″ Drive Flex Head Breaker Bar

$26.99 Original price was: $26.99.$22.99Current price is: $22.99.

This 18″ 1/2″ drive breaker bar gives you the extra leverage to break loose rusted, seized, or over-tightened nuts and bolts that a ratchet should not be asked to handle. The 180-degree flex head reaches around obstacles, a spring-loaded ball bearing holds the socket on the drive, and the bar is drop-forged, heat-treated chrome vanadium steel with a mirror chrome finish.

SKU: TG-BB1812 Category:

This 18″ breaker bar is a 1/2″ drive bar for breaking loose rusted, damaged, or over-tightened nuts and bolts. The extra length gives you more leverage than a standard ratchet, so you can free a fastener without risking the ratchet mechanism. Once the fastener breaks loose, finish the job with a ratchet or a torque wrench.

The head flexes 180 degrees, so you can set the drive at an angle and still pull in a straight line around a frame, housing, or other obstacle. A spring-loaded ball bearing holds the socket on the square drive. The drive uses radius corners that lock onto the sides of the fastener rather than the edges, which helps reduce socket wear. The bar is drop-forged, heat-treated chrome vanadium steel with a mirror chrome finish that wipes clean of oil and grime.

Applications

  • Breaking loose rusted, seized, or over-tightened nuts and bolts
  • Lug nuts and tire work where a 1/2″ drive socket is used
  • Automotive, equipment, and industrial maintenance
  • Stuck fasteners on machinery, trailers, and shop equipment
  • Stubborn 1/2″ drive hardware on fence gates, posts, and fittings, when a ratchet is not enough

Specifications

Drive size 1/2″
Overall length 18″
Head 180-degree flex head
Socket retention Spring-loaded ball bearing
Drive Square drive with radius corners
Material Drop-forged, heat-treated chrome vanadium steel
Finish Mirror chrome polish
Sold as Single 18″ breaker bar

Usage notes

  • This is a breaker bar, not a torque wrench. It has no scale and no click. Use it to break a fastener loose, then tighten to spec with a torque wrench.
  • Fits standard 1/2″ drive sockets. It will not fit 3/8″ or 3/4″ drive sockets without an adapter.
  • Set the flex head at the angle you need, then pull steadily. Do not use a cheater pipe on the handle.
  • A 15″ 1/2″ drive flex head breaker bar is also listed when you want a shorter bar for tighter spaces.

FAQ

What is an 18″ breaker bar used for? It gives you 18 inches of leverage on a 1/2″ drive socket so you can break loose rusted, seized, or over-tightened nuts and bolts. Common uses include lug nuts, equipment fasteners, and any stubborn 1/2″ drive hardware.

Is this a torque wrench? No. A breaker bar has no torque scale and no click. Use it to break the fastener loose, then use a torque wrench when the job has to be tightened to a set value.

How is this different from the 15″ breaker bar? Both are 1/2″ drive bars with a 180-degree flex head, a spring-loaded ball, and chrome vanadium construction. The 18″ bar is longer and gives you more leverage. The 15″ bar is shorter when space is tight.

Will it fit my 1/2″ drive sockets? Yes. The square drive is 1/2″, with a spring-loaded ball bearing to hold the socket.

Does the flex head lock at an angle? The head pivots 180 degrees so you can pull from an angle around an obstacle. Set the angle, then apply steady force.

Questions? Call ToolGuy at 800-350-TOOL (8665) or email sales@toolguy.com.

Weight 1.74 lbs

Recently Viewed Products