15″ 1/2″ Drive Flex Head Breaker Bar

$19.99 Original price was: $19.99.$15.99Current price is: $15.99.

This 15″ 1/2″ drive breaker bar is the shorter bar for breaking loose rusted, seized, or over-tightened nuts and bolts when an 18″ bar will not fit. The 180-degree flex head reaches around obstacles, a spring-loaded ball bearing holds the socket on the drive, and the bar is drop-forged, heat-treated chrome vanadium steel with a mirror chrome finish.

SKU: TG-BB1512 Category:

This 15″ breaker bar is a 1/2″ drive bar for breaking loose rusted, stubborn, or over-tightened nuts and bolts. At 15 inches it still gives you more leverage than a standard ratchet, in a length that is easier to use in tight engine bays, against a frame, or anywhere a longer bar will not swing. Once the fastener breaks loose, finish the job with a ratchet or a torque wrench.

The head flexes 180 degrees, so you can set the drive at an angle and still pull in a straight line around an obstacle. A spring-loaded ball bearing holds the socket on the square drive. The drive uses radius corners that lock onto the sides of the fastener rather than the edges, which helps reduce socket wear. The bar is drop-forged, heat-treated chrome vanadium steel with a corrosion-resistant mirror chrome finish. The handle is a contoured chrome grip.

Applications

  • Breaking loose rusted, seized, or over-tightened nuts and bolts in tighter spaces
  • Lug nuts and general 1/2″ drive socket work where a shorter bar is easier to swing
  • Automotive, equipment, and industrial maintenance
  • Stuck fasteners on machinery, trailers, and shop equipment
  • Stubborn 1/2″ drive hardware on fence gates, posts, and fittings, when a ratchet is not enough

Specifications

Drive size 1/2″
Overall length 15″
Head 180-degree rotating flex head
Socket retention Spring-loaded ball bearing
Drive Square drive with radius corners
Material Drop-forged, heat-treated chrome vanadium steel
Finish Mirror chrome polish
Handle Contoured chrome handle
Sold as Single 15″ breaker bar

Usage notes

  • This is a breaker bar, not a torque wrench. It has no scale and no click. Use it to break a fastener loose, then tighten to spec with a torque wrench.
  • Fits standard 1/2″ drive sockets. It will not fit 3/8″ or 3/4″ drive sockets without an adapter.
  • Set the flex head at the angle you need, then pull steadily. Do not use a cheater pipe on the handle.
  • An 18″ 1/2″ drive flex head breaker bar is also listed when you want more leverage and have the room to swing it.

FAQ

What is a 15″ breaker bar used for? It gives you 15 inches of 1/2″ drive leverage to break loose rusted, seized, or over-tightened nuts and bolts. The shorter length is useful when an 18″ bar will not fit or cannot swing.

Is this a torque wrench? No. A breaker bar has no torque scale and no click. Use it to break the fastener loose, then use a torque wrench when the job has to be tightened to a set value.

How is this different from the 18″ breaker bar? Both are 1/2″ drive bars with a 180-degree flex head, a spring-loaded ball, and chrome vanadium construction. The 15″ bar is shorter for tight spaces. The 18″ bar is longer and gives you more leverage.

Will it fit my 1/2″ drive sockets? Yes. The square drive is 1/2″, with a spring-loaded ball bearing to hold the socket.

Does the flex head lock at an angle? The head pivots 180 degrees so you can pull from an angle around an obstacle. Set the angle, then apply steady force.

Questions? Call ToolGuy at 800-350-TOOL (8665) or email sales@toolguy.com.

Weight 1.31 lbs

Recently Viewed Products